RPT-9000 Dual Band

RPT-9000 Dual Band Cellular Repeater

 


The RPT-9000 is a carrier class cellular extender and repeater for CDMA, GSM, 3G, 4G and AMPs.

The RPT-9000D is a dual band, carrier class cellular repeater and bi-directional amplifier (BDA) for 2G, 3G, 4G, GSM, CDMA, WCDMA, EDGE, EVDO, iDEN, HSPA+, UMTS, LTE*, TDMA and AMPS. The unit can expand cellular coverage without adding a new cellular tower. In most applications, this can save up to 90% of a new tower installation. Distances away from the cell tower can be up to ~ 80Km/50 miles or more**.

Typical applications include filling valleys and shadow areas. Cellular extension to rural areas, underground tunnels, large buildings, emergency areas and just about any location with limited or non-existent cellular reception.

 

Benefits

  • Extends GSM, CDMA, WCDMA, UMTS, LTE*, iDEN, TDMA and AMPS cellular service from existing cell towers up to 80Km/50 miles or more**
  • Extends cellular Voice, SMS and Data services
  • Saves up to 90% of the cost for a new cell tower
  • Allows areas with a weak signal or dead spots to have full cellular service
  • Provides hard to reach services like underground tunnels, parking garages, tall buildings, malls and valleys
  • Simple and rapid deployment
  • No programming knowledge required
  • Supports standard 600,700, 800, 850, 900, 1700, 1800, 1900, 2100, 2300 or 2600 MHz cellular service.
  • 850 MHz and 1900 MHz FCC and IC certified
  • Power output - +30 dBm RMS
  • Hardened NEMA enclosure with AC or DC power supply
  • Low power requirements - 80 watts
  • Extreme temperature capability / -30° to +50° Celsius
  • Simple visual LED indicators for aligning antennas
  • Simple attenuation switches for amplification settings
  • Reliable cellular repeater designed and manufactured in North America
  • 2 Year Warranty

 

 
 

Frequency Specifications

Current Bands and Uplink/Downlink Options (choose 2 bands from the list below)

 

Band
Number
Band
Frequency
Band
Name
Uplink
(MHz)
Downlink
(MHz)
Bandwidth
(MHz)
Geo-
Area
1 2100 IMT 1920-1980 2110-2170 60 Global
2 1900 PCS 1850-1910 1930-1990 60 NAR
3 1800 DCS 1710-1785 1805-1880 75 Global
4 1700 AWS-1 1710-1755 2110-2155 45 NAR
5 850 CLR 824-849 869-894 25 NAR
7 2600 IMT-E 2500-2570 2620-2690 70 EMEA
8 900 E-GSM 880-915 925-960 35 Global
12 700a Lower SMH 699-716 729-746 17 NAR
13 700c Upper SMH 777-787 746-756 10 NAR
27 800 SMR 806-821 851-866 15 NAR
30 2300 WCS 2305-2315 2350-2360 10 NAR
71 600 USDD 663-698 617-652 35 NAR
 
 

Further Product Information

 

Long distance, Bidirectional link
The RPT-9000D extends cellular service up to 80Km/50 miles or more** with complete bi-directional service. This allows for both voice and data applications with little or no restrictions on the services you are accustomed to. If your cellular phone supports Internet, email or SMS, you will receive the same service over the repeater.


Extend multiple cellular providers
When extending cellular service with RPT-9000D, the capability to repeat the signal from more than one cellular operator is possible. If the cellular towers for multiple providers are in the range of the Pickup (donor) antenna, those services will be repeated since the RPT-9000D is agnostic to the mobile provider and repeats everything in the designated frequency. Since the cellular frequency is licensed and owned by the cellular providers, you receive their services and nothing else. In addition, there are antenna options for cell towers that are not in the same location.


Reach hard to reach places with the Fiber option
Some applications may not have a direct line of site. There may be a large hill or mountain blocking the site between the cellular tower and the area fill location where cell signal is needed. The RPT-9000D has an RF over Fiber Hybrid option (RPT-9000DH) that extends the RF signal over a single strand of single mode fiber optic cable. By running armored fiber optic cable above or below ground between the RPT-9000DH Master unit (donor antenna side facing the cell tower) and Slave unit (area fill side facing the users), cellular service can be extended in areas where coverage was non-existent.


The alternative to Satellite, Wi-Fi and Phone lines
Providing emergency voice services to rural, underground or hard to reach places can be a challenge. A popular choice is satellite which can be effective in certain applications except for the high cost, complex technical equipment and restrictions not inherent in cellular services. The use of Wi-Fi has many limitations including distance. Traditional phone lines will not solve the problem since they are fixed and not mobile. The same is true for traditional microwave and ISM solutions. The obvious choice is to extend 2G/3G/4G cellular service where available and maintain all the features with the RPT-9000. With cellular services, the complex technology is hidden, you only require the cellular signal. The RPT-9000 regenerates a clear and strong signal.


Let the RPT-9000D be your solution. Call or email your XPANDAcell representative today.

* 4G LTE 600 USDD, 700 SMH, 1700 AWS and 2300 WCS under development.
** Distance is dependent on cellular tower configuration timing and terrain. 2G GSM has a theoretical limit of 35 Km unless Advanced Timing/Extended Range is enabled on the BTS.

 

Quick Contact

Fields marked with * are required