RPT-9000 FAQ

Tel: 410-583-1701     Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Open Panel

Installation - RPT-9000

Does the RPT-9000 have complicated programming and setup?

No, the RPT-9000 is extremely simple to set up and operate. The unit uses simple toggle switches and LED indicators…

No, the RPT-9000 is extremely simple to set up and operate. The unit uses simple toggle switches and LED indicators for installation and maintenance. There are NO interfaces for a computer and NO command-line programming involved.

How do I align the Antennas on the RPT-9000 when the cell tower is far away?

The RPT-9000 has visual LED indicators that indicate the reception of the cellular signal. Antennas are simply moved in the…

The RPT-9000 has visual LED indicators that indicate the reception of the cellular signal. Antennas are simply moved in the direction of the cell tower and the LED indicators will guide you. If the LED indicators completely light up, you simply use the attenuation switches to bring the signal down to proper levels.

What type of cabling is used from the RPT-9000 to the Antennas?

Depending on the required length of the cables, we use 1/2 inch to 2-1/4 Heliax Cable. This provides low loss…

Depending on the required length of the cables, we use 1/2 inch to 2-1/4 Heliax Cable. This provides low loss between the RPT-9000 and Antennas.

What type of RF Connectors are used on the RPT-9000?

Standard "N" Type Female connectors. There are (2) connectors for a standard RPT-9000. The RPT-9000 integrated with a FTP-5000 will…

Standard "N" Type Female connectors. There are (2) connectors for a standard RPT-9000.

The RPT-9000 integrated with a FTP-5000 will have one RF connector.

Where is the RPT-9000 mounted?

Typically, the RPT-9000 is mounted at the base of a tower or the shed/housing. This allows the unit to be…

Typically, the RPT-9000 is mounted at the base of a tower or the shed/housing. This allows the unit to be configured, serviced or maintained with safety and ease. The unit could be mounted at the middle or top of tower if desired since the unit has a hardened, sealed NEMA housing.

Please see the following example of an actual customer RPT-9000 Layout drawing.

XPANDAcell
909 Ridgebrook Rd.
Suite 101
Sparks, MD 21152
Tel: +1-410-583-1701
Fax: +1-410-583-1704
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.